Feel Good Solutions from ZCP Mfg. Inc

3W
Single and multi zone heating and cooling mixing applications - commercial panel with lock for recessed applications.

Application
The 3W Mult Zone Panel is used in heating and/or cooling applications requiring up to 9 zones of mixed water. The cover of the unit is designed with a lock for commercial applications - can receive a remote 4-20 mA or 0-10VDC or floating point temp signal - comes with 3 way mixing valve and pump.

4WE
Single Zone and multi temperature mixing and distribution panels for radiant and other hydronic systems

Application
Single Outlet - The 4WE single outlet provides one outlet of mixed water and one outlet of high temperature water. Other than the zone valves, the single outlet unit has all the features of the multi zone unit.
 
Multi-Zone- The 4WE multi zone panel is the heart of our modular system. It is used in applications requiring up to 5 Zones of mixed water applications. Each panel is also equipped with a high tempurature outlet used for supplying indirect water heaters, fan coils, etc. The 4WE is rated at 100 mbh based on a 20 degree F, Delta T.

BFP
BFP is the near boiler piping for single or multiple boiler, with or without reset and sequencing control.

Application
Used to complete a system, and used in heat pump systems-heating and/or cooling. Comes ready to plug and play.

BHP
BHP is a high temp zone distribution module designed to match up with the BFP above

Application
Provides up to 3 high temp takeoffs and zones for controlling baseboard, fan coils, coils, etc.

CHP
The CHP combines a sequential controller (Danfoss ECL) or Snow Melt Control with a VFD (Danfoss VLT) control for the system pumps in one pre wired UL package.

Application
The CHP is a significant energy saving device - pumps will rarely operate at full capacity (and full energy usage) due to logic of VFD and ECL combined.

CMB
Prefabricated Zone Control Panel. Designed for use with high efficiency condensing/or modulating boilers.

Application
Capable of delivering 100 MBH, the CMB was designed specifically to work in conjunction with today's condensing and/or modulating boilers in hydronic heating systems. The CMB bridges the gap between the heat source and the heat emitters, interfacing with the system operating controls.

CMBP-SS
Info

Application
Info

COM
COM (Commercial Zoning Panel) panels provide a package solution for controlling larger numbers of zones effectively in large residential or light commercial projects.

Application
Capable of delivery up to 400 MBH based on a 20 degree F, Delta T, the COM panel was designed specifically for large residential or light commercial applications. The COM panel can be the heart of a large modular heating system. It is used in applications requiring from 6 to 16 zones of mixed water.

DRS
Compact mixing and distribution station for hydronic radiant heat systems. Designed for wall mounting.

Application
The DRS3T03000 is the perfect solution for adding Hydronic Radiant floor heating or warming to small, single zone areas such as bathrooms, kitchens, basements, garages and sunrooms.

DRS2050
DRS2050 is a compact mixing and distribution system, single mixed temp, 2 pumped zones.

Application
The DRS2050 has similar applications to the DRS3T03000 above but has 2 pumped zones and slightly larger output.

DRS2052T
DRS2052 is a compact mixing and distribution system, one high temp zone and one mixed temp, 2 pumped zones.

Application
The DRS2052T has similar applications to the DRS3T03000 and the DRS2050 above but has 2 pumped zones (one high temp one mixed) and slightly larger output.

ECL
The advanced ECL controlled by Danfoss installed in a UL control panel pre wired and labeled.

Application
Provides control for:
Mixing valves with outdoor reset. Snow melt systems - with all necessary sensors. Multiple boiler systems with outdoor reset.

HXPRO
HXPRO Panels provide a unique solution to Hydronic and/or radiant systems which mix potable and non potable systems. These Panels can be used in a variety of applications, specifically with wall hung instantaneous water heaters.

Application
Capable of delivery up to 70 MBH based on a 20 degree F, Delta T, the HXPRO panel was designed specifically to isolate a potable heating source from a non potable water or heating water with glycol mix. When supplied with an optional flow switch it can be used as a heating panel in conjunction with wall hung instantaneous water heaters to provide a low temp (typically radiant) heat source.

HXPSolar
Info

Application
Info

MBP
Prefabricated Zone Control Panel designed for use with high efficiency condensing and/or modulating boilers.

Application
Capable of delivering 225 MBH,the MMB was designed specifically to work in conjunction with today's condensing and/or modulating boilers in hydronic heating systems. The MMB bridges the gap between the heat source and the heat emitters, interfacing with the system operating controls.

SM
SM (Snow Melt) panels provide a package solution for controlling outdoor manual or automatic snow/ice melt systems.

Application
Available in capacities up to 400 MBH, SM panels can be applied in a variety of applications. Multiple units can be utilized in extremely large installations.

TWH
For use with water heaters, one mixed, zoned pumped.

Application
See HXPro above - less HX (Required by most codes)

ZVP
Info

Application
Info